Hotline：
133-3102-1811
Chinese
News
首页 > News > Industry information >
How to reasonably choose dry pendant and dry adhesive for different stones?
Date：2020-09-22 09:40:00
Share：
How to choose the dry pendant rationally according to different stone materials
Regardless of the type of suspension and suspension, the stone is first evaluated, including the color, pattern, type and price of the stone, origin, suitability, strength and material, surface treatment and ease of processing. In the process of machining, the difference of different pendant forms lies in the drilling or slotting on the end face of slab.
For the stone fixed by pin type dry pendant, after fixing the stone, the position of pin hole is determined by horizontal direction X and vertical direction Y data, and then the hole is punched. Professional stamping equipment should be used, operators should receive professional training, and in a professional processing plant. Hole depth, perpendicularity and punching speed should be strictly controlled to ensure machining accuracy.
The stone fixed by the plate type dry pendant is to determine the position of the groove on the end face of the stone, the groove, while taking care of the length, width and thickness of the three directions, in the stone processing plant or field processing. Using portable grinders for temporary production is technically difficult and easy to process, but it is safe to do so.
For stones fixed by slotted dry hangers, long slotted stones should be provided at the end of the stone, which must be done at the processing plant. A lot of processing capacity. After opening the groove, the depth, position, perpendicularity, parallelism and the sides of the groove should be checked. Cleavage can only be used by qualified personnel.
A dry pendant lamp, also known as a small fixture, consists of the main component and two subcomponents, the S-type and the E-type. The main and sub-components slide together in the chute and the rubber strip is attached to the side wall (usually on the right wall of the main component) to avoid hard contact between the main and sub-components. The main board has a mounting hole in the board and is bolted to the Angle steel on the secondary keel. The subplate groove opening is an S-shaped second member, and the downward second member is an E-shaped second member.
When the main component has one chute, it is mounted on the uppermost or lowermost level. When there are two chutes in the main section, one chute shall be arranged above the other and installed in the middle layer. The S-shaped auxiliary member engages with the chute where the main member is located, and the E-shaped auxiliary member engages with the chute where the main member is located.
When the main member is provided with a chute, the connection between the plate and the right wall may be located in the middle or at the bottom of the right wall, so that the bottom surface forms a plane with the bottom surface. Sliding slots and other options are available based on ease of manufacture and use. Any part.
When the main member is provided with two chutes, the connection between the plate and the right wall may be located in the middle of the right wall or in the same plane as the underside of the upper chute, or any other part may be selected for the convenience of manufacture and use.
How to use dry adhesive properly
1, the use of dry hanging glue, the need to ensure that the paste area of every square meter of the SLATE is not less than 105 square centimeters, with the glue thickness is not less than 3 mm, the weight and thickness of the SLATE exceeds the limit on time, should increase the paste area.
2. The dry adhesive cannot be heavily loaded during the initial curing period;
3, paste surface should be dry and not wet (moisture content should not be higher than 15%) dust-free oil, firm but not loose;
4. Paste surface is too smooth and needs rough treatment. The adhesive surface has the material which affects the bonding effect (metal surface paint, floating rust layer, etc.) needs to be removed.
5. When the construction temperature is lower than 10℃, heating can be done at the sticking part, but not higher than 65℃.
6. In winter, when the construction is under 10℃, THE PM slow-dry adhesive cannot be used. PF quick-dry adhesive should be used entirely, and the effective construction time can be extended by 6-10 minutes.
7. The adhesive parts that have exceeded the construction effective time cannot be moved any more. If they need to be moved, the adhesive shall be adjusted and pasted again;
8. During construction, if welding and installation are needed, the welding point should be more than 3cm away from the adhesive tape.
9. Marble glue is suitable for quick bonding and positioning. Due to poor weather resistance, it is only suitable for indoor but not outdoor. Dry hanging glue is suitable for stone metope dry hanging, the stickability and strength of dry hanging glue are stronger than marble glue.
Note:
The paste surface is roughened.
The adhesive surface has the material that affects the bonding effect (metal surface paint, floating rust layer, etc.) to remove.
When the construction temperature is lower than 10℃, heating can be done in the sticking part, but not higher than 65℃.
About us Business introduction Corporate culture Enterprise brand Subordinate institution Qualification honor
News Company dynamics Industry information
Technological process Dry Fixing Technology AB Using Method
总
Beijing Sarlsson New material Co,.Ltd.
Beijing Adress：Daxing Industrial Zone Beijing
Beijing Telephone： 13331021811 / 13331025578
分
Bengbu Sarlsson New Material Co,.Ltd.
Anhui Adress：Economic Development Zone Huaiyuan Country Anhui Province
Anhui Telephone： 0552-8698885 / 8698886 / 8698887
Anhui Adress：Economic Development Zone Huaiyuan Country Anhui Province
Anhui Telephone： 0552-8698885 / 8698886 / 8698887
分
Jiangxi Sarlsson New material Co.,Ltd.
Penggao Industrial Zone Shangli Country Pingxiang City Jiangxi Province
Copyright © 蚌埠赛尔时代工贸有限公司 皖ICP备17024280号
技术支持：智导互联