Hotline:
133-3102-1811
Chinese
News
首页 > News > Industry information >
Whole process of sealant construction (I)
Date:2020-04-17 09:40:00
Share:
In the home decoration materials, there is no more grounding than sealant. If you look at the corner positions of closestool, pool table, window, glass, metal, etc., you need sealant to assist.
Next let's take a look at the sealant construction. Simply speaking, when using the sealant, just use the extrusion gun to squeeze the gel into the gap to be filled, and it can be solidified in a day under normal room temperature, forming a watertight sealing effect.
Sealant construction process
Preparation of construction materials and tools:
Manual or pneumatic glue gun; scraper, masking paper, wallpaper knife, cleaning blade; gloves, wipes, etc.
Base treatment:
Gap cleaning, paste masking paper
Clean the gap of the base material; shovel off the old glue and residual glue, and clean and dry the gap without oil, open water and dust. Paste masking paper on both sides of the gluing part.
Installation of glue gun:
Cutting rubber head, cutting rubber pipe and installing rubber pipe
The nozzle diameter shall be less than the gap width, so that the nozzle is one-half deep into the interface. Make the gap rubber full and full without material shortage.
Gluing Construction:
Single direction continuous and uniform glue injection to prevent cavity or blister.
Copyright © 蚌埠赛尔时代工贸有限公司 皖ICP备17024280号
技术支持:智导互联