Sarlsson SS-9800 Neutral Silicone Curtain Wall Structural Adhesive

SS-9800 is a one-component silicone rubber structural sealant.

- Neutral curing, non-corrosive to metals, coated glass, concrete and marble (granite).

- Excellent weathering resistance, with a service life of 50 years under normal climatic conditions.

- Excellent high and low temperature resistance, with little change in performance from -40 ° C to 150 ° C.

- Excellent adhesion to most building materials, generally without the use of primer.

- High strength, high adhesion, high modulus, high flexibility.

- Good compatibility with other neutral silicone adhesives.

-It is a solvent-free product with low vulcanization shrinkage and is an environmentally friendly product.

The main purpose:

Various structural bonding: glass, stone (marble, granite), aluminum curtain wall and glass lighting roof and structural sealing of metal structure engineering. Insulating glass two-way adhesive seal.

Many other architectural and industrial uses.

Standards compliant:

SS-9000 meets or exceeds the following standards:

·National GB/T16776-2005 silicone structural sealant for construction

·United States ASTMC1184-2005 silicone structural sealant

·This enterprise standard

 

colour:

SS-9000 is black or other color required by the customer.

 

package:

SS-9000 is packed in a 300ml plastic cylinder (net volume 300ml) and 590ml composite film.

 

Use restrictions:

· Not suitable for all greases. A plasticizer or solvent material, such as a painted surface.

• Not suitable for frosted or wet surfaces.

· One-component SS-9000 silicone structural sealant should not be used in dense and non-ventilated places, because one-component SS-9000 silicone structural sealant needs to absorb moisture from the air to cure.

· Not suitable for continuous water seepage or wet places all year round.

· When the surface temperature of the material is lower than 4 ° C or exceeds 40 ° C, it is not suitable for construction.

Technical Support:

· Provide complete product technical information.

·Adhesion test

The SS-9000 silicone structural sealant series has excellent adhesion to most building materials such as glass, anodized aluminum, ceramic tile, granite, wood, steel and some plastics, but due to the continuous emergence of new building materials and With the new surface treatment technology application, we cannot guarantee that silicone structural sealants will be suitable for all materials. In some cases, silicone structural sealants and materials in engineering need to be tested for adhesion. The company's laboratory can provide users with adhesion test, evaluate the bonding performance of the company's silicone structural sealant products and materials used in the user's engineering, and test results, product recommendations, surface treatment methods and whether to use primer. The content is submitted to the user in writing.

·Compatibility test

Foam strips, double-sided strips and other assembly aids, if incompatible with silicone rubber, can cause discoloration of the silicone rubber and even loss of cohesiveness. In order to avoid such problems, our laboratory provides users with compatibility testing services. Users can mail (or other forms) the auxiliary materials selected in the project to us. The company's laboratory will conduct compatibility tests and give written test reports.

·Contamination test

The company's laboratory can provide users with pollution testing. Users can mail (or other forms) the substrate selected in the project to us. The company will conduct pollution testing and give a written test report.

 

Interface design

·The silicone structural sealant interface design must be carried out by professionals based on JGJ102 [[Glass Curtain Wall Engineering Technical Specification]].

· Silicone structural sealant width and thickness should not be less than 6mm.

• The width of the silicone structural sealant must be greater than or equal to its thickness.

• The interface of the silicone structural sealant must be able to fill the adhesive with a standard standard construction method.

The design of the bonding width and thickness of the silicone structural sealant portion is carried out according to JGJ102 [[Glass Curtain Wall Engineering Technical Specification]].

• The interface must be designed so that the structural adhesive is in contact with air for curing and must not move during curing.

 

Safety instructions

This product is not toxic after it is fully cured, but should avoid contact with eyes before curing. If it is in contact with eyes, please rinse with plenty of water and consult a doctor. The uncured product should be kept out of contact with children.

 

Curing time

After the SS-9000 silicone structural sealant is extruded and exposed to air, it begins to cure from the surface and inside. The surface drying time is about 40 minutes, and the maximum curing force is fully cured after 21 days.