Sarlsson Neutral Silicone Weathering Stone Special Adhesive

- One-component, easy to use, good extrudability and thixotropy in the temperature range of 4 ° ~ 40 °, can be directly applied by extrusion.

- Neutral curing, non-corrosive to metals, coated glass, concrete, marble, granite.

- The formula contains no plasticizer and is non-polluting to marble, granite and other building materials.

- It has a good bonding effect on various marble, granite, cement board and other materials, and will not change due to wind, snow and rain, effectively ensuring the sealing effect of the glue.

- Excellent weathering resistance, aging resistance, UV resistance, ozone resistance and water resistance.

·

The main purpose

· Dry-hanging stone curtain wall engineering and cement precast board engineering joint sealing.

· Bonding and caulking sealing of ceramic engineering.

Seam sealing between stone and other materials such as glass, metal, etc.

·Other uses such as stone works.

 

Standards compliant

The SS-8900 meets or exceeds the following criteria:

·National Standard GB/T23261-2009

·American Standard ASTM C 920-01

· This company standard.

package

SS-8900ml is packaged in a plastic bottle (net volume 300ml), (590ml) composite film.

 

 

colour:

The SS-8900 is black and white grey and other colors required by the customer.

 

Use restrictions:

• Cannot be used as a silicone structural adhesive.

·

· Not suitable for all greases. A plasticizer or solvent material, such as a painted surface.

• Not suitable for frosted or wet surfaces.

· Not suitable for dense and non-ventilated places, because one-component SS-9000 silicone weatherproof sealant needs to absorb moisture from the air to cure

· Not suitable for continuous drowning or wet places all year round.

· When the surface temperature of the material is lower than 4 ° C or exceeds 40 ° C, it is not suitable for construction.

 

 

Technical Support:

· Provide complete product technical information.

·Adhesion test

SS-8900 silicone weatherproof sealant series has excellent adhesion to most building materials such as glass, anodized aluminum, ceramic tile, granite, wood, steel and some plastics, but due to the continuous emergence of new building materials and With the new surface treatment technology application, we cannot guarantee that silicone sealants will be suitable for all materials. In some cases, silicone sealants and materials in engineering need to be tested for adhesion. The company's laboratory can provide users with adhesion testing, assess the bonding properties of the company's silicone sealant products and materials used in the user's engineering, and the experimental results, product recommendations, surface treatment methods and whether the use of primers The content is presented to the user in writing.

·Compatibility test

Foam strips, double-sided strips and other assembly aids, if incompatible with silicone rubber, can cause discoloration of the silicone rubber and even loss of cohesiveness. In order to avoid such problems, our laboratory provides users with compatibility testing services. Users can mail (or other forms) the auxiliary materials selected in the project to us. The company's laboratory will conduct compatibility tests and give written test reports.

·Contamination test

The company's laboratory can provide users with pollution testing. Users can mail (or other forms) the substrate selected in the project to us. The company will conduct pollution testing and give a written test report.

 

 

Safety instructions

This product is not toxic after it is fully cured, but should avoid contact with eyes before curing. If it is in contact with eyes, please rinse with plenty of water and consult a doctor. The uncured product should be kept out of contact with children.