Hotline：
133-3102-1811
Chinese
Silide Marble Adhesive
Main Composition
Unsaturated polyester resin, peroxide, filling
Application
Fast fixing, pattern making, repairing and bonding for stone, ceramics, granite and vitrified brick, etc
Main Properties
Double components adhesives;
Short curing time(the exact time depending on application temperature);
High hardness could be polished after curing;
Wide range of operation (-10℃～45℃);
Various colors for all kinds of stone color, such as transparent, cream, white, black, red, green, etc
Hardener is white gel.
Unsaturated polyester resin, peroxide, filling
Application
Fast fixing, pattern making, repairing and bonding for stone, ceramics, granite and vitrified brick, etc
Main Properties
Double components adhesives;
Short curing time(the exact time depending on application temperature);
High hardness could be polished after curing;
Wide range of operation (-10℃～45℃);
Various colors for all kinds of stone color, such as transparent, cream, white, black, red, green, etc
Hardener is white gel.
Product Brief
Main ingredients: unsaturated polyester resin, inorganic filler
Main use: suitable for rapid positioning, mosaic, repair and bonding of building stones, ceramics and vitrified bricks
Product characteristics: can be constructed at low temperature (- 10~45 ℃)
It has the characteristics of high hardness, good polishing and fast curing
Transparent, white, beige, green, red, black and other colors can be selected for stones of different colors
Physical properties of each component
Component A (marble glue)
Main components
Unsaturated polyester resin
form
Transparent paste
Light yellow transparent fluid
Colored paste
Colored semifluid
Viscosity (25 ℃)
100~300Pa·S
0.7~1.2 Pa·S
350~800 Pa·S
4~80 Pa•S
density
1.20~1.50g/cm3
1.05~1.20 g/cm3
1.40~1.60 g/cm3
1.20~1.50 g/cm3
Decomposition products
H2O and CO2 will be released when burning in case of fire
Component B (curing agent)
form
White or light yellow paste
Viscosity (25 ℃)
100~200Pa·S
density
1.10~1.20g/cm3
Decomposition products
H2O and CO2 will be released when burning in case of fire
usage method:
The bonding surface should be clean and dry. If the bonding surface is too smooth, be sure to polish and coarsen it
Take 100 parts of adhesive and mix 2~3 parts of curing agent, and fully mix evenly
Apply the glue mixing tool to the bonding surface
matters needing attention:
Do not put the remaining glue into the bucket after mixing
If it is necessary to speed up or slow down the curing rate of marble glue, please increase or decrease the curing dose (the amount of curing agent shall not be less than 0.5% or more than 5%)
Please store it in a cool and dark place, and close the lid in time after use
If you need to firmly dry hang adhesive, please use our company's epoxy AB dry hang adhesive
The shelf life is 12 months (see the end of the product for the production date)
Do not frequently contact with moisture and frost
The tools should be cleaned with acetone immediately after use
Other products
About us Business introduction Corporate culture Enterprise brand Subordinate institution Qualification honor
News Company dynamics Industry information
Technological process Dry Fixing Technology AB Using Method
总
Beijing Sarlsson New material Co,.Ltd.
Beijing Adress：Daxing Industrial Zone Beijing
Beijing Telephone： 13331021811 / 13331025578
分
Bengbu Sarlsson New Material Co,.Ltd.
Anhui Adress：Economic Development Zone Huaiyuan Country Anhui Province
Anhui Telephone： 0552-8698885 / 8698886 / 8698887
Anhui Adress：Economic Development Zone Huaiyuan Country Anhui Province
Anhui Telephone： 0552-8698885 / 8698886 / 8698887
分
Jiangxi Sarlsson New material Co.,Ltd.
Penggao Industrial Zone Shangli Country Pingxiang City Jiangxi Province
Copyright © 蚌埠赛尔时代工贸有限公司 皖ICP备17024280号
技术支持：智导互联