Chinese
Hotline: 133-3102-1811 Chinese
How is carbon fiber reinforced construction? (6)
Date:2021-03-02 09:40:00 Share:
Application of adhesive:
 
1. Before applying the adhesive, check the construction environment, whether there is water on the construction surface, and whether the leveling adhesive is dry.
 
Do not drench.
 
Check whether there is water on the construction surface. If there is water, wipe it off with cotton thread and place it for a period of time to confirm whether there is water again. There may be ponding, so the construction should be stopped.
 
Confirm whether the pre gluing or greasing is finger contact curing.
 
Confirm whether there is soil and dust on the construction surface. If there is, wipe it off with a blower, cotton thread, etc.
 
2. Glue mixing
 
Resin has summer (s) and winter (W), according to the construction period to distinguish the use.
 
Check whether there is residual resin, solvent and dust in the container used for metering and mixing, and then use it.
 
Pay attention to the ratio of main agent and curing agent.
 
The amount of one-time use should consider the time and coating area, and the mixing amount should be within the usable time.
 
Use electric mixer and scraper to mix well. It is difficult to stir in the lower corner of the mixing container, so special attention should be paid.
 
3. Apply adhesive
 
Brush the adhesive evenly on the concrete surface with roller brush.
 
According to the surface state of concrete, the type and dosage of carbon fiber cloth are different, but it must be uniform as the standard.