Hotline：
133-3102-1811
Chinese
News
首页 > News > Industry information >
How to deal with stone column?
Date：2020-10-25 09:40:00
Share：
I believe that many partners will encounter the "pillars" in the frame, which gives people a feeling of thick and tall. How do you deal with these pillars?
1. Base cleaning and repairing: remove the floating and sinking on the cylindrical structural surface, add ash and plug holes, and ensure the cleanness of the base course.
2. Measurement control of hanging surface: according to the requirements of the design drawings and the specification of the processed stone, the vertical line and elevation line are set out on the cylindrical surface. Pop up the vertical control line of the stone, set out the horizontal control line of the plate with the elevation line as the baseline, and determine the drilling position of the pendant.
3. Cylindrical drilling: YG type expansion bolt with diameter of 10.5mm and depth of 60mm is adopted.
4. Installation of cylindrical steel frame: the channel steel is connected and fixed on the reinforced concrete cylindrical structure with corner bar, and the No. 8 channel steel of full length vertical keel is directly welded on the steel plate fixed with expansion bolt, and both sides are fully welded. The secondary keel is installed on the vertical keel, and the secondary keel is made of 40 * 40 * 4 angle steel.
5. Installation of stainless steel pendant: according to the determined point after measurement, after the stone is in place and tested, then tighten and fix the "t" shaped part.
6. Arc stone slab installation: the numbered stone slab is temporarily placed in place, and adjusted by using the adjusting hole of "t" shaped parts. Adjust the perpendicularity and radian of the arc-shaped slab, and then remove the stone slab for local treatment. After the adjustment meets the requirements, connect and fasten the hanging pieces.
7. Glue injection caulking: when the arc stone is installed in place accurately, the gap in the hanger and groove, as well as the stone joint, shall be filled with dolomite glue.
About us Business introduction Corporate culture Enterprise brand Subordinate institution Qualification honor
News Company dynamics Industry information
Technological process Dry Fixing Technology AB Using Method
总
Beijing Sarlsson New material Co,.Ltd.
Beijing Adress：Daxing Industrial Zone Beijing
Beijing Telephone： 13331021811 / 13331025578
分
Bengbu Sarlsson New Material Co,.Ltd.
Anhui Adress：Economic Development Zone Huaiyuan Country Anhui Province
Anhui Telephone： 0552-8698885 / 8698886 / 8698887
Anhui Adress：Economic Development Zone Huaiyuan Country Anhui Province
Anhui Telephone： 0552-8698885 / 8698886 / 8698887
分
Jiangxi Sarlsson New material Co.,Ltd.
Penggao Industrial Zone Shangli Country Pingxiang City Jiangxi Province
Copyright © 蚌埠赛尔时代工贸有限公司 皖ICP备17024280号
技术支持：智导互联