Chinese
Hotline: 133-3102-1811 Chinese
Analysis of common problems in using standard of dolomite glue?
Date:2020-09-04 09:40:00 Share:
As a kind of two-component, mixed use engineering glue, dolomite glue is very easy to be affected by temperature and humidity, workers' proficiency, so it is easy to appear various small incidents in the process of using. The following small to summarize some common problems about the use of dolomite glue, let's have a look~~
 
1、 The curing speed of dolomite glue is too fast or too slow
 
This phenomenon is usually caused by the use of curing agent in the specification for the use of dolomite glue or the selection of curing agent. If it is a problem of usage, it is only necessary to adjust the curing time by increasing or decreasing the curing agent. If it is seasonal change, please select the curing agent in line with the season, which can greatly shorten the curing time and improve the winter construction efficiency. Take a look at our company's cels dolomite Glue. Maybe it will help you more~~
 
2、 How to deal with the fast solidification of winter products in stock?
 
With the gradual rise of temperature, the curing agent used in winter will solidify too fast and inconvenient for construction. At this time, you don't have to worry too much about the inventory caused by not selling in time. Just reduce the amount of curing agent, you can obviously extend the curing time (reduce the dosage by half, extend the time by twice, and the initial setting time is more than 3min), and other properties will not be affected. Workers can adjust at any time according to the local climate conditions to achieve the best use effect.
 

3、 What is the reason of stone glue polluting stone?
 
reason:
 
1. Excessive use of component B or uneven mixing
 
2. During construction, the glue will be drenched before it is fully solidified
 
3. Improper use
 
resolvent:
 
1. Mix in strict accordance with the mixing proportion of components a and B, and properly lengthen the mixing time and mix evenly;
 
2. Try to apply glue in continuous sunny days to avoid curing and rain;
 
3. Dolomite glue is generally solidified in about 20 minutes, which is not easy to cause pollution in such a short time. However, dry hanging glue is used for strengthening and thickening in some construction. Due to the long curing time (at least 24 hours) of dry hanging glue, it is easy to be interfered by construction conditions, operation methods, ratio and other external factors, so attention should be paid when using.
 
Precautions for the use of dolomite glue:
 
1. Do not pour the remaining glue back into the barrel after mixing;
 
2. If it is necessary to speed up or slow down the curing speed of dolomite glue, please increase or reduce the curing dosage (the amount of curing agent shall not be less than 0.5% or more than 5%);
 
3. Please store in a cool and dark place, and close the lid of the barrel after use;
 
4. Pay attention to the shelf life and follow the principle of first in first out;
 
5. Do not contact wet and frosty environment frequently for the bonded materials;
 
6. If dry hanging is needed, please select AB dry hanging adhesive of our company;
 
7. Clean the tool immediately after use or clean it with acetone.
 
Beijing Saier industrial and trade company's Dolomite rubber products are produced with genuine and high-quality raw materials, and the performance fully meets the high requirements of the project for quality. However, the correct construction method and suitable construction environment are also very important. Therefore, the first-class construction effect needs the joint efforts of manufacturers and all parties.