Chinese
Hotline: 133-3102-1811 Chinese

Silicone Sealant

 
Construction requirement:
 
1. The construction temperature must be 6℃ to 50℃。
 
2. The surface of construction material must be dry, clean and free of grease and dirt.
 
3. A compatibility test must be done before using it.
 
Product Brief
Component
 
room temperature solidification dimethyl siloxane, inorganic padding, additive and Neutral
 silicone solidification agent.
 
 
Application:
 
The SAIERSHI No.168 silicone sealant can be bonded and sealed with most constructive
 and curtainwall materials, such as glass, aluminum materials, sprayed aluminum material,
 ceramics, concrete, building stone, steel and stainless steel etc.It can also be used to 
caulk and seal for the automobile, container, refrigerator, lamps and lanterns with excellent
 performance,such as cohesiveness, extendibility, water tightness, air tightness etc.  
 
 
Characteristic:
 
1. It can be used directly without being mixed with activator or other materials.
 
2. It will not react with other materials without causticity.
 
3. It has excellent atmospheric aging resistance and will not be effected by ultraviolet 
radiation.ozone,rainwater,snow and ice and extremely high or low temperature.It can 
still hold the elasticity and will not stiffen,break or smash within the temperature from
-40℃ to +140 ℃ after solidifying.
 
4. Environmental material. Pollution free.Non-hazardous product.
 
 
Construction requirement:
 
1. The construction temperature must be 6℃ to 50℃。
 
2. The surface of construction material must be dry, clean and free of grease and dirt.
 
3. A compatibility test must be done before using it.
 
 
Storage:
 
1. It should be stored in a dry and cool place below 27℃.
 
2. Shelf life is 10 months after production.
 
 
Standard level:
 
GB/T14683-2003
Other products